Buying used equipment is a smart way to stretch a fitout budget, but only if you know what you are buying. Two refurbished fryers can look identical on the showroom floor, while one has been stripped, tested and covered by a written warranty and the other has simply been wiped down. The only way to tell the difference is to ask. This guide to used commercial kitchen equipment: questions to ask about testing and warranty gives you the exact questions, what a good answer sounds like, and the red flags that mean you should walk away.
Key takeaways
- Ask exactly which tests were run, for how long, and whether the results are written down.
- Check electrical items have been tested and tagged, and gas items checked by a licensed gasfitter.
- Find out the age, previous use and what parts were replaced during refurbishment.
- Get the warranty in writing: how long, parts and labour, on-site or return to base, and what voids it.
- Know that private sales and auctions usually come with far fewer protections than buying from a dealer.
- If a seller cannot answer clearly, treat the unit as untested and adjust your offer or walk away.
Used Commercial Kitchen Equipment: Questions to Ask About Testing and Warranty
Every question you need falls into one of four groups: testing, history and refurbishment, warranty, and compliance and support. Work through all four for any machine you are serious about, whether it is a fridge, a fryer or a passthrough dishwasher. Keep this list of used commercial kitchen equipment: questions to ask about testing and warranty on your phone, and do not pay a deposit until every answer is clear.
1. Questions about testing
Start with the most important question: what tests were actually run on this unit? A good dealer will name them. For a fridge, that means a temperature pull-down test, with the cabinet reaching and holding 5°C or below, the benchmark set by Food Standards Australia New Zealand. For gas cooking equipment, it means every burner lit, flames checked and thermostats confirmed. For a dishwasher, it means wash and rinse temperatures reached and no leaks during a full cycle.
Then ask how long the unit ran under test. Switching a fridge on for ten minutes proves very little; running it for several hours with temperatures recorded proves a great deal. Ask whether the results were written down, and whether you can see the unit running before you buy. If the answer is “it was working when it came in”, the unit has not really been tested.
2. Questions about history and refurbishment
Next, find out where the equipment has been. Ask its age, which you can often confirm from the data plate, and what kind of venue it came from. A fridge from a quiet office canteen has lived a very different life to one from a 24-hour takeaway. Ask why it was sold. Venue closures and upgrades are common and reassuring answers; “it kept breaking down” is not.
Then ask what the refurbishment involved. A proper refurbishment means worn parts replaced, such as door seals, elements, thermostats or fan motors, followed by cleaning and sanitising inside and out. Ask for a list. A unit that needed nothing at all is possible, but the seller should still be able to tell you what was checked.
3. Questions about warranty
The warranty is where many buyers get caught. Ask how long it lasts, and get the answer in writing on the quote or invoice. Ask whether it covers parts, labour or both, because a parts-only warranty can still leave you with a large callout bill. Ask whether repairs are done on-site or whether you need to bring the unit back, which matters a great deal for a 1,900 mm upright fridge. Ask who carries out warranty repairs and how quickly they respond, and what would void the warranty, such as installation by an unlicensed tradesperson.
Remember that a dealer’s warranty is not the only protection. The consumer guarantees under the Australian Consumer Law can apply to many purchases a business makes from another business, including second hand goods, with age, condition and price taken into account. Private sales and most auctions offer far less. The Australian Competition and Consumer Commission explains the details, and this is general information rather than legal advice.
4. Questions about compliance and support
Finally, ask about safety and support after the sale. For plug-in equipment, ask whether it has been tested and tagged, and when. WorkSafe Victoria explains employers’ duties to keep electrical equipment safe in the workplace. For gas equipment, confirm the jets suit your gas type and that the unit will be installed by a licensed gasfitter, who will issue a compliance certificate as described by Energy Safe Victoria. Then ask whether parts are still available for the model, and who you call when something needs servicing in two years’ time.
Questions checklist for used equipment
TESTING
- Which tests were run on this unit?
- How long did it run under test?
- Can I see the results in writing?
- Can I see it running today?
HISTORY AND REFURBISHMENT
- How old is it, and where was it used?
- Why was it sold?
- Which parts were replaced?
- Was it cleaned and sanitised?
WARRANTY
- How long is the warranty?
- Does it cover parts and labour?
- On-site or return to base?
- What would void the warranty?
COMPLIANCE AND SUPPORT
- Has it been tested and tagged?
- Has the gas side been checked?
- Who installs and commissions it?
- Are parts and service available locally?
Tip: Screenshot this list and tick off each answer before you pay a deposit.
Forty Years of Hospitality Expertise, Since 1984
Since 1984 we have supplied the hospitality industry with professional advice, reliable equipment and excellent customer service. We have a wealth of experience in all types of projects ranging from international hotels to large and small pubs through to suburban restaurants and takeaway outlets. All our staff are equipped with the knowledge, expertise and creativity to add value to your project.
After forty years of refurbishing, selling and servicing equipment, we welcome these questions. Every one of them has a clear answer for the refurbished units on our floor, because our own technicians test them and our own service team stands behind them. Read more about our history.
Browse the refurbished stock
Ask us every question on this list about any refurbished unit on our floor. Visit the showroom at 15 Station Street to see units running, or browse online first. No charge, no pressure, just straight answers about testing and warranty.
See refurbished equipmentGood Answers and Red Flags
The answers matter as much as the questions. A confident seller gives specific, written answers. A seller who is unsure, vague or keen to change the subject is telling you something too. Use this table to judge what you hear.
| Question | A good answer | A red flag |
|---|---|---|
| What tests did you run? | Specific tests named, with results | “It was working when it came in” |
| How long did it run under test? | Hours, with temperatures or readings recorded | “We turned it on to check” |
| Has it been tested and tagged? | Yes, with a current tag on the lead | No tag, or an expired tag |
| What parts were replaced? | A list: seals, elements, thermostats and so on | “Nothing needed doing” with no detail |
| How old is it? | Year from the data plate or records | “Not sure” |
| What warranty applies? | Written terms covering parts and labour | Verbal only, or “sold as is” |
| Who does warranty repairs? | Named in-house or local technicians | “You would need to find someone” |
| Are parts available? | Yes, from local suppliers | “That model is discontinued” |
Use this table during any purchase: dealer, private sale or auction.
A single vague answer is not necessarily a deal-breaker, especially at a private sale where the seller may simply not know. But when several answers are vague, treat the unit as untested, and price it like a gamble rather than a refurbished machine. If you are comparing a dealer price with a cheaper private sale, the difference is often the cost of the testing and warranty you are not getting. Before you choose the cheaper option, put a rough dollar value on a breakdown in your first month of trade, including the callout, the repair and the lost sales. For most kitchens, that number is larger than the gap between the two prices, which is why so many operators who use this list of used commercial kitchen equipment: questions to ask about testing and warranty end up buying from a dealer.
Dealer, Private Sale or Auction: What Protection You Get
Where you buy changes how many of these questions you can get answered, and how much protection you have if something goes wrong.
Buying from a dealer
A refurbishment dealer should be able to answer every question on this list. Units are usually tested before sale, a written warranty is standard, and the business is selling in trade, so the consumer guarantees under the Australian Consumer Law can also apply. You pay more than at a private sale, but much of that difference is the testing, the warranty and the support.
Buying privately
Private sellers are often honest and helpful, but they rarely have test results or service records, and they usually sell as is. Because they are not selling in trade, the consumer guarantees generally do not apply in the same way. Use the questions to judge condition, insist on seeing the unit running, and price the risk into your offer.
Buying at auction
Auctions can be good value for experienced buyers, but you often cannot see equipment running and protection after the sale is limited. Factor in the buyer’s premium, removal and the cost of having the unit checked by a technician before you rely on it.
Testing Questions by Equipment Type
Each type of equipment has its own tests worth asking about specifically.
Refrigeration
Ask whether the fridge or freezer was run to temperature and for how long, whether door seals were replaced, and whether the condenser was cleaned. Ask the refrigerant type and whether the sealed system has ever been repaired or regassed. Browse our commercial refrigeration range to compare tested refurbished units with new.
Gas cooking equipment
Ask whether every burner, pilot and thermostat was tested, whether the safety devices work, and which gas type the unit is set up for. Conversion between natural gas and LPG is possible on many models, but it must be done properly. See our commercial cooking range for current options.
Dishwashers
Ask whether the machine reached its wash and rinse temperatures, whether pumps and elements were checked, and whether it was descaled. Ask what power supply it needs, because some passthrough machines need three-phase power. Compare models in our commercial dishwashing range.
Combi ovens, ice machines and coffee machines
These have complex electronics, water systems or both. Ask for service records, any error history and whether the water system was descaled and sanitised. Without clear answers, these are usually better bought new.
Questions About Delivery and Installation
The questions do not stop at the sale. Ask how the unit will be delivered and whether the price includes delivery, how it will get through your doorways, and who will install and commission it. Gas appliances need a licensed gasfitter, and some dishwashers and fridges need a dedicated electrical circuit or plumbing work. Ask whether installation by the dealer’s own technicians keeps the warranty valid, and whether installation by your own tradespeople could affect it. A unit that is tested in the showroom but installed badly can still fail, so make sure someone is responsible for the whole job.
Why testing matters more than appearance
A polished exterior tells you how well a unit was cleaned, not how well it works. Stainless steel buffs up beautifully, and a fresh set of shelves can make a tired fridge look almost new. What matters is what happens when it runs: whether the fridge pulls down to temperature, whether the burners hold a steady flame, whether the dishwasher reaches its rinse temperature. That is why the testing questions come first on this list, and why a scruffy unit with a full test record can be a better buy than a shiny one with none.
Get It in Writing
Verbal answers are easy to forget and hard to rely on. Before you pay, make sure the quote or invoice lists the make, model and serial number, the condition, whether it is refurbished, ex demo or as new, the warranty length and what it covers, and any test results or replaced parts. That one document protects you if anything goes wrong. Print our “used commercial kitchen equipment: questions to ask about testing and warranty” checklist above and take it with you, so nothing is missed. If a seller is happy to write the answers down, that is usually the best sign of all.
Refurbished Units With the Answers Ready
These refurbished units from our current range have been tested by our technicians, and the team can answer every question on this list for each of them. Stock moves quickly, so see the full range on our refurbished equipment page, or read our second hand catering equipment guide for what is worth buying used.
Trusted Brands and Quality You Can Count On
New and refurbished stock changes through the year. Ask the team what is on the floor today.
MRCE in Numbers
Melbourne Refrigeration & Catering Equipment, supplying Australia’s hospitality industry since 1984
Flexible, tailored kitchen equipment funding
Why rent when you can own? MRCE offers a flexible funding solution for commercial kitchen equipment, tailored to suit the hospitality industry.
- ✓No hidden costs
- ✓No balloon payment at the end
- ✓Claim the GST upfront at the start
- ✓Own the equipment from day one
- ✓Fast and streamlined approval
- ✓Funding options to suit your application
From Inception to Completion, End-to-End Project Management
From inception to design, throughout installation to completion, let our expert staff oversee your project. No matter how large or small, we work closely with architects and consultants on your commercial kitchen and bar requirements. We arrange qualified service technicians for equipment problems whenever they crop up, a kitchen that’s down is a kitchen losing money. At MRCE we aim to keep our customers coming back as their business grows.
A warranty is only as good as the people behind it. Because we test, sell, install and service our refurbished equipment, warranty work goes back to the same team that prepared the unit, with no finger-pointing between a seller and a separate repairer. When you are ready to plan, the full equipment catalogue shows new and refurbished options side by side.
Get Straight Answers on Testing and Warranty From a Local Specialist
The best way to use this list is to ask it face to face, with the machine running in front of you. At our showroom on Station Street, Dandenong, you can see refurbished units under test, compare them with new equivalents and get every answer written on your quote. Explore our catering equipment and supplies in Dandenong page, or contact our team to ask about testing and warranty on any unit before you visit.
Questions, concerns, or need a hand?
Don’t hesitate to reach out. MRCE’s dedicated team is ready to provide the support you need: a quick technical question, a quote on a specific unit, a finance enquiry, or a full kitchen fitout. We’ll point you to the right answer, even if that’s not buying from us today.
Get in touch with our teamVisit, call, or email us
Showroom
15 Station Street
Dandenong, Victoria 3175
Australia-wide shipping available
Get in touch
Phone: (03) 9794 8627
Fax: (03) 9794 7258
Email: sales@melbournerefrigeration.com.au
Trading hours
Monday to Friday
Sales / Service: 9:00am to 5:00pm
Admin: 8:30am to 3:30pm
Saturday: By appointment only
Please call during the week to arrange. Closed on public holidays.
What we cover
Sales, finance, free consultation, installation, fitout management, after-sales service and 24/7 technical support.


0 Comments