Visiting a Catering Equipment Showroom in Dandenong

Published on: November 17, 2026

A showroom visit is the fastest way to turn a vague equipment list into a quote you can act on, but only if you walk in prepared. Most first visits to a catering equipment showroom in Dandenong stall on the same questions. How wide is the back door? Is the site on natural gas or LPG? How many plates go out on a Friday night? Answer those before you leave home and one visit can do the work of three phone calls. This guide covers exactly what to bring to our Station Street showroom, what to measure, what to ask on the floor, and how to book a time that suits your trading hours.

Key takeaways

  • Bring a measured floor plan, including every doorway between the kerb and the kitchen.
  • Photograph your gas meter, switchboard, canopy and any equipment you plan to keep.
  • Know your menu and your busiest hour, because both decide burner output and fridge size.
  • Arrive with a budget range and ask about finance on the day, so the quote and funding line up.
  • Bring the person who will cook on the equipment, not only the person paying for it.
  • Call ahead for a weekday slot or a Saturday appointment, and book outside your own peak trade.

What to Bring to a Catering Equipment Showroom in Dandenong: The Eight-Item Kit

Think of the visit as a working meeting rather than a browse. The team can only recommend the right size and specification if they understand your site, your menu and your budget. After forty years of showroom visits, we know the eight things that separate a productive hour from a pleasant chat that ends with “we’ll need to come back”. Every one of them is easy to gather in an afternoon.

WHAT TO BRING TO THE SHOWROOM1Measuredfloor planWall lengths, bench runs,canopy size and everydoorway on the deliveryroute.2Site photosGas meter, switchboard,canopy, power points andthe current kitchen layout.3Menu and peaknumbersYour dishes and covers inthe busiest hour of theweek.4Gas and powerdetailsNatural gas or LPG, plussingle-phase or three-phasepower.5ExistingequipmentlistPhotos of compliance plateson anything you plan tokeep.6Budget rangeA realistic range, andwhether you want to talkabout finance.7Key datesLease start, councilinspection and the day youwant to open.8The rightpeopleYour chef or kitchen lead,plus whoever signs off thespend.Arrive with these eight and one visit can turn into a working quoteMissing measurements are the most common reason a second visit is needed

Measurements and site photos

The single most useful thing you can bring is a floor plan with real measurements. It doesn’t need to be an architect’s drawing. A hand sketch on grid paper works, as long as every wall, bench run and doorway has a number on it. Measure the canopy too, since gas cooking equipment usually has to sit underneath it. Then walk the delivery route from the kerb to the kitchen and note the narrowest point, because a fridge that fits the kitchen but not the corridor is no use to anyone.

Photos fill in what measurements miss. Take clear shots of the gas meter, the switchboard, the canopy, the power points along each wall and the kitchen as it stands today. Five minutes with your phone can save a site visit just to answer a basic question.

Your menu and your busiest hour

Equipment is sized to the menu, not to the room. A cafe selling toasties and coffee needs very different gear to a restaurant cooking biryani in 40-litre pots. Bring a copy of your menu, or a list of the dishes you plan to sell, and an honest estimate of covers in your busiest hour. That one number tells the team how much burner output, fryer capacity and cold storage you actually need. A kebab shop doing 80 wraps between 6pm and 7pm on a Friday needs a different grill and fridge setup to one doing the same number spread across the whole day. If you have trading history from an existing site, bring it. If you are new, a sensible estimate based on your seating and your neighbours is far better than a guess on the day. If you are still working out storage volumes, our guide to sizing a commercial fridge shows the maths.

Gas, power and the equipment you already own

Before you fall in love with a cooking line, know what will run it. Check whether the site is connected to natural gas or uses LPG bottles, because the two need different jets and the wrong order costs time. Note whether the switchboard supplies single-phase or three-phase power, since larger dishwashers, combination ovens and some refrigeration need three-phase. If you are unsure, your gasfitter or electrician can confirm it quickly. Any new gas appliance must be installed by a licensed gasfitter, and Energy Safe Victoria sets out the compliance certificate they will issue.

If you are keeping some existing equipment, photograph the data plate on each unit. Model numbers, gas type and electrical ratings help the team match new gear to what stays.

Budget, timeline and the right people

Bring a realistic budget range rather than a single number, and decide before you arrive whether you want to talk about finance. Write down your key dates too: when the lease starts, when the council inspection is booked and the day you want to open. Lead times on some refrigeration and cooking equipment can stretch, so your timeline shapes what is practical.

Finally, bring the right people. The person paying for the kitchen and the person cooking in it often want different things. A chef will spot a burner layout that won’t suit the menu in seconds, and the owner will keep an eye on the total. Having both in the room avoids a second round of decisions.

Forty Years of Hospitality Expertise, Since 1984

Since 1984 we have supplied the hospitality industry with professional advice, reliable equipment and excellent customer service. We have a wealth of experience in all types of projects ranging from international hotels to large and small pubs through to suburban restaurants and takeaway outlets. All our staff are equipped with the knowledge, expertise and creativity to add value to your project.

Forty years of showroom visits means our team has seen every version of the first-time buyer, from the nervous cafe owner with a napkin sketch to the hotel procurement team with full drawings. We know which questions to ask so your hour on the floor turns into decisions, not homework. Learn more about MRCE.

Free, obligation-free consultation

Visit our showroom at 15 Station Street, or ask for someone to attend your premises, obligation-free. There’s no charge, no pressure, no follow-up sales call. Just our team walking your floor and giving straight answers about what fits.

Book your free consultation

The Measurements That Decide What Fits

If you only have time to prepare one thing, make it the measurements. These are the numbers the team will ask for first, how to take them, and why each one matters. Measure twice, write everything in millimetres, and photograph the tape against anything awkward like a step or a narrow corner.

What to measureHow to measure itWhy it matters
Doorways and corridorsNarrowest width and height on the route from kerb to kitchenA 1,900 mm upright fridge has to fit through every one of them
Canopy length and depthFront edge to wall, end to endGas cooking equipment usually has to sit under the canopy
Each wall and bench runWall to wall, noting windows, pipes and switchesDecides how many units fit side by side
Ceiling heightFloor to ceiling at the back of the kitchenTall units and shelving need clearance for ventilation
Power points and circuitsCount outlets and note any 15 amp or three-phase pointsSome equipment needs a dedicated circuit or three-phase power
Gas meter and lineLocation and a photo of the meter labelConfirms natural gas or LPG and helps estimate supply capacity
Counter to kitchen distancePass to front counter, in metresShapes where display and hot holding should sit
Delivery accessRear lane, loading bay or front door, plus any stepsAffects delivery planning and installation time

Swipe sideways to see the full table on mobile.

The most common measuring mistakes are easy to avoid. People measure the room but forget the doorway, measure the doorway but forget the door handle, or measure wall to wall without allowing for the gap equipment needs at the back for airflow. Refrigeration in particular needs breathing space around the condenser, and a fridge jammed hard against a wall works harder and fails sooner. Gas cooking equipment also needs clearance to combustible surfaces, which your gasfitter will confirm. When in doubt, measure the bare space and let the team allow for clearances, rather than subtracting your own estimate first.

Once your measurements and paperwork are ready, the visit itself follows a simple pattern. Here is how a well-prepared visit usually runs at a catering equipment showroom in Dandenong, from the first phone call to the quote.

YOUR SHOWROOM VISIT, STEP BY STEP1Call aheadBook a weekday slotor a Saturdayappointment2Arrive preparedFloor plan, photos,menu and budget inhand3Walk the floorSee units runningand open every door4Compare optionsNew and refurbishedside by side5Talk financeWork out fundingalongside the quote6Quote and sitevisitConfirm sizes onsite before orderingPrepared visits move from browsing to a firm quote far fasterAllow about an hour for a full kitchen walk-through

MRCE in Numbers

40+
Years on Station Street, Dandenong
10+
Major brands stocked
24/7
After-sales support
100%
Australia-wide shipping
Free
Site consultations

Melbourne Refrigeration & Catering Equipment, supplying Australia’s hospitality industry since 1984

MRCE FAST FINANCE

Flexible, tailored kitchen equipment funding

Why rent when you can own? MRCE offers a flexible funding solution for commercial kitchen equipment, tailored to suit the hospitality industry.

  • ✓No hidden costs
  • ✓No balloon payment at the end
  • ✓Claim the GST upfront at the start
  • ✓Own the equipment from day one
  • ✓Fast and streamlined approval
  • ✓Funding options to suit your application
Talk to our team about finance

On the Showroom Floor: What to Check and What to Ask

Once you are prepared, the visit itself is where the real value sits. A showroom lets you do things a product page never can. Here is how to make the most of your hour.

Open every door and read the plates

Equipment looks the same in photos. In person, the differences show quickly. Open fridge doors and feel the seals. Pull drawers out to full extension and check the runners. Lift a bain marie lid and look at the hinge. On cooking equipment, check how easily the burners and drip trays come out for cleaning, because your staff will do it every night.

Where you can, ask to see units running. A display fridge switched on shows you how evenly the lighting falls on the shelves, how loud the compressor is at the counter and how quickly the glass clears after the door opens. Those details are impossible to judge from a spec sheet, and they matter every single day of trade.

Then read the plates. The compliance and data plate tells you the gas type, electrical rating and model number. On refrigeration, the Energy Rating label gives you a fair comparison of running costs between models, which matters more than a small difference in purchase price over the life of a fridge that runs all year.

Compare new and refurbished side by side

One of the biggest advantages of a catering equipment showroom in Dandenong that carries both new and refurbished stock is the side-by-side comparison. You can stand between a new unit and a refurbished alternative and judge the difference with your own eyes. Refurbished can save 40 to 60%, but warranty windows are shorter, so ask what testing has been done, what warranty applies and whether parts are still readily available for that model.

Questions worth asking before you leave

A few questions separate a good purchase from a regrettable one:

  • What is the lead time if this unit is not in stock?
  • Are spare parts held locally, and how quickly can a technician attend?
  • What does installation involve, and who connects the gas and power?
  • How will it be delivered, and does the delivery route need to be checked?
  • What finance options suit this purchase?
  • Is there a newer or more efficient model that does the same job?
  • What cleaning and maintenance does this unit need each week?

Write the answers down or ask for them on the quote. Browse the commercial cooking range and the commercial refrigeration range before you come in, so you arrive with a shortlist.

Replacing a single broken unit in a hurry

Not every visit is a full fitout. Often a fridge has died mid-week or a fryer has failed before the weekend, and you need a replacement fast. In that case, bring less but bring it precisely. Photograph the data plate on the broken unit, measure the exact gap it sits in (width, depth and height), and note how the power or gas connects. Tell the team how quickly you need it running, because that decides whether new stock, a refurbished unit or a temporary option makes the most sense. With those details, a replacement can often be sorted in a single call or a short visit.

What happens after the visit

A good visit ends with a clear next step. Usually that is a written quote listing each unit, its dimensions and its gas or power requirements. For a larger fitout, the team may suggest a site visit to confirm measurements before anything is ordered, which is worth accepting because it catches problems while they are still free to fix. After that come the order, delivery scheduling, installation by licensed trades and a final check that everything runs as it should. Keep your quote, your floor plan and your compliance certificates together, as the council and your insurer may ask for them later.

Planning your visit: hours, appointments and timing

Sales and service hours run from 9:00am to 5:00pm Monday to Friday. Saturdays are by appointment only, which suits operators who can’t leave the business during the week, so call during the week to arrange a time. Book your visit outside your own peak trade, because a rushed visit leads to rushed decisions. Allow about an hour for a full kitchen walk-through, less if you are replacing a single unit. Before you book, check with Greater Dandenong City Council whether your fitout plans need approval, so you know which requirements to raise during the visit. If you are planning a complete kitchen, our commercial kitchen setup checklist is worth reading first.

Showroom visit checklist

BEFORE YOU LEAVE

  • Floor plan with every wall, bench run and doorway measured
  • Photos of the gas meter, switchboard and canopy
  • Menu, plus covers in your busiest hour
  • List and photos of equipment you are keeping
  • Budget range and key dates written down

ON THE SHOWROOM FLOOR

  • Open every door and drawer, check seals and hinges
  • Read the compliance and data plates
  • Compare new and refurbished side by side
  • Ask about parts, warranty and service response
  • Ask about delivery, installation and finance

Tip: Screenshot this checklist or print it, and tick each item off before you walk out the door.

From Inception to Completion, End-to-End Project Management

From inception to design, throughout installation to completion, let our expert staff oversee your project. No matter how large or small, we work closely with architects and consultants on your commercial kitchen and bar requirements. We arrange qualified service technicians for equipment problems whenever they crop up, a kitchen that’s down is a kitchen losing money. At MRCE we aim to keep our customers coming back as their business grows.

A good first showroom visit often becomes the start of a long working relationship. The operator who walks in with a floor plan for one cafe tends to walk back in a few years later with plans for a second site in Berwick or Pakenham, knowing the team already understands how they cook. When you are ready to plan your own fitout, the full equipment catalogue is a good place to build your shortlist.

Your Local Catering Equipment Showroom in Dandenong, Since 1984

Our showroom has sat at 15 Station Street, Dandenong for more than forty years, and the catering equipment showroom in Dandenong you visit today is run by a team that knows the south-east food trade inside out. Visiting a local catering equipment showroom in Dandenong means you can see refrigeration running, compare cooking equipment in person and talk to people who have fitted out cafes, takeaways and restaurants across the south-east. Bring your eight-item kit, ask every question on your list and leave with a quote you can act on. To see what we stock locally, visit our catering equipment and supplies in Dandenong page, or get in touch with the team to book a weekday visit or a Saturday appointment.

Questions, concerns, or need a hand?

Don’t hesitate to reach out. MRCE’s dedicated team is ready to provide the support you need: a quick technical question, a quote on a specific unit, a finance enquiry, or a full kitchen fitout. We’ll point you to the right answer, even if that’s not buying from us today.

Get in touch with our team

Visit, call, or email us

Showroom

15 Station Street
Dandenong, Victoria 3175
Australia-wide shipping available

Get in touch

Phone: (03) 9794 8627
Fax: (03) 9794 7258
Email: sales@melbournerefrigeration.com.au

Trading hours

Monday to Friday
Sales / Service: 9:00am to 5:00pm
Admin: 8:30am to 3:30pm
Saturday: By appointment only
Please call during the week to arrange. Closed on public holidays.

What we cover

Sales, finance, free consultation, installation, fitout management, after-sales service and 24/7 technical support.

Frequently asked questions

Is there a catering equipment showroom in Dandenong I can visit?
Yes. Melbourne Refrigeration & Catering Equipment has run its showroom at 15 Station Street, Dandenong since 1984. You can see new and refurbished commercial refrigeration, gas cooking equipment, hot holding and stainless steel benches, and talk to sales and service staff on the spot. Sales hours are 9:00am to 5:00pm Monday to Friday, and Saturday visits are available by appointment. Calling ahead lets the team have the right units ready for you.
Do I need an appointment to visit the showroom?
Not during the week, though calling first is a good idea. Walk-ins are welcome Monday to Friday during sales hours. Saturdays are by appointment only, so call during the week to arrange a time. Booking ahead on any day means the right person is free to walk you through the range, and any unit you want to see can be checked and ready on the floor.
What should I bring to a commercial kitchen equipment showroom?
Bring a measured floor plan, photos of your site, your menu and an idea of your busiest hour. Add your gas type and power supply, a list of any equipment you plan to keep, a budget range and your key dates. If you can, bring the chef or kitchen lead who will use the equipment every day. With those in hand, the team can recommend sizes and prepare a quote on the same visit.
Can I arrange equipment finance during my showroom visit?
Yes. The team can talk you through MRCE Fast Finance while you are choosing equipment, so the quote and the funding are worked out together. There are no hidden costs and no balloon payment at the end, you can claim the GST upfront, and you own the equipment from day one. Ask the team what business details the lender will need so you can bring them along or send them through after the visit.
How much does a showroom consultation cost?
Nothing. Showroom consultations and site visits are free and obligation-free, with no follow-up sales call. Equipment costs depend on the size of your kitchen, your menu and whether you choose new or refurbished, which can save 40 to 60% on comparable new units with shorter warranty windows. Bringing a budget range lets the team show you options that fit, and the quote you leave with is free too.

0 Comments

Submit a Comment

Your email address will not be published. Required fields are marked *

Product Enquiry

0
0
Your Cart
Your cart is emptyReturn to Shop