Commercial Kitchen Equipment for Food Trucks in Melbourne

Commercial Kitchen Equipment for Food Trucks in Melbourne | MRCE

Equipping a food truck in Melbourne requires a fundamentally different approach to commercial kitchen equipment for food trucks than a fixed kitchen fitout. Every centimetre of bench space, every kilogram of equipment weight, every amp of electrical load, and every litre of water storage is a constraint that the food truck operator must solve before the first service day. Getting the equipment wrong means a kitchen that cannot perform on-site — and there is no builder coming to fix it next week.

Melbourne's food truck scene — from the weekly markets in Dandenong and Springvale to the event circuits across Cranbourne, Berwick, and the eastern suburbs — demands equipment that is compact, road-worthy, independently powered, and built for the same service intensity as a fixed kitchen. This guide covers every decision a Melbourne food truck operator needs to make before purchasing commercial kitchen equipment.

Key Takeaways

  • Weight is a real constraint — every heavy commercial unit you add reduces your payload and affects your truck's vehicle certification.
  • LPG is the most practical cooking fuel for Melbourne food trucks — it is portable, high-output, and does not require a mains connection.
  • Compact underbench refrigeration is the correct refrigeration spec for a food truck — upright fridges are too tall for most truck fit-outs.
  • Water storage and grey water management are compliance requirements — your council health inspection will check these at every permit renewal.
  • MRCE stocks compact commercial kitchen equipment suited to food truck builds at the Dandenong showroom.

The Key Constraints of Commercial Kitchen Equipment for Melbourne Food Trucks

A food truck kitchen operates under four constraints that a fixed commercial kitchen never faces:

  • Space: Most Melbourne food trucks have a working kitchen area of 4–8 square metres — less than a large domestic kitchen. Every unit must be the smallest capable size for the job.
  • Weight: A truck's vehicle certification has a gross vehicle mass limit. Heavy commercial equipment that is fine in a fixed kitchen may push a food truck over its legal limit. MRCE can advise on the weight specifications of specific units.
  • Power: Without a mains hookup, a food truck operates from LPG, a generator, or a battery/inverter system. Most commercial cooking equipment runs on LPG for food trucks; refrigeration typically runs from 240V generator power or a dedicated battery bank.
  • Compliance: Melbourne Council and VicRoads both have requirements for food truck kitchens. Food Standards Australia New Zealand's Standard 3.2.2 Food Safety Practices applies to food trucks as fully as it does to fixed premises — temperature control, hand-washing facilities, and sanitation are non-negotiable regardless of your kitchen's mobility.
FIVE FOOD TRUCK EQUIPMENT ZONES 1. Cooking Zone LPG burner range or griddle Countertop fryer (if required) Convection or speed oven Salamander or grill LPG-powered, compact spec 2. Refrigeration Zone Underbench fridge (600mm) Underbench freezer (if needed) Ice and cold drink storage Prep fridge or cool box 240V from generator or battery 3. Prep and Service Stainless bench (750mm depth) Service window with shelf Under-bench storage drawers Bain marie (hot food service) Compact custom or standard units 4. Water System Fresh water tank (min 40L) Hand-wash basin (FSANZ req) Grey water tank (equal capacity) 12V or 240V water pump Health inspection mandatory 5. Power and Safety Generator or inverter system LPG regulator and hose set Fire suppression system Canopy extraction (if gas) VicRoads and council required

Five equipment zones every Melbourne food truck kitchen must cover before first service.

Essential Commercial Kitchen Equipment for Food Trucks in Melbourne — By Category

Cooking Equipment — LPG-Powered, Compact Format

The cooking line of a Melbourne food truck runs almost exclusively on LPG — it is portable, high-output, and does not require a mains connection or generator load. The most common configuration is a two or three-burner LPG range with a griddle plate for the main cooking surface, plus a countertop LPG fryer for any fried menu items. Compact convection ovens or deck ovens running on LPG are available for trucks with baking requirements. The full MRCE cooking equipment range includes countertop units suited to food truck specifications.

Refrigeration — Underbench is the Only Practical Option

Upright commercial fridges are impractical in a food truck — they are too tall for most truck canopies and too heavy for the payload constraints of most commercial truck configurations. Underbench refrigeration in 600mm or 900mm widths is the correct specification. A single underbench fridge plus a separate underbench freezer (where required) can fit beneath a standard stainless bench run on one side of the truck. The MRCE underbench refrigeration range includes models suitable for food truck installation.

Benching, Prep, and Service

Standard 750mm-depth stainless benching is the food truck workhorse. Most Melbourne food trucks run a single continuous bench run on one side of the truck with a service window cut into the wall above it. Under-bench shelving maximises every cubic centimetre of storage beneath the working surface. MRCE's benching and shelving range includes standard lengths and custom fabrication options for non-standard truck configurations.

Water System and Hand-Washing

FSANZ Standard 3.2.2 requires a dedicated hand-wash basin separate from any food preparation sink — this applies to food trucks as fully as to fixed kitchens. Melbourne Council health inspectors check water system capacity and grey water management at every food truck permit inspection. A minimum 40L fresh water tank and matching grey water capacity is the standard recommendation for a standard Melbourne market or event service day. FSANZ's guidance on food safety and display is also relevant to how food trucks hold and display product during service.

Forty Years of Hospitality Expertise — Since 1984

Since 1984 we have supplied the hospitality industry with professional advice, reliable equipment and excellent customer service. We have a wealth of experience in all types of projects ranging from international hotels to large and small pubs through to suburban restaurants and takeaway outlets. All our staff are equipped with the knowledge, expertise and creativity to add value to your project.

MRCE's Dandenong showroom is well-positioned for Melbourne's food truck market — the south-east corridor hosts a dense network of weekly and monthly markets, event circuits, and food precincts where food trucks operate regularly. When a food truck operator visits the showroom describing their truck footprint and menu, our trade team can identify the compact commercial units that meet service requirements within the space and weight envelope. Forty years on Station Street means the trade calls us first. Learn more about MRCE here.

Free, obligation-free consultation

Visit our Dandenong showroom with your truck dimensions and menu — or ask for someone to attend your premises. We can identify the right compact commercial units for your build, obligation-free.

Book your free consultation

What Does a Food Truck Kitchen Cost to Equip in Melbourne?

EquipmentTypical cost (new)Notes
LPG two-burner range / griddle$800–$2,200Countertop format
Countertop LPG fryer$600–$1,800Single tank, 8–12L
Underbench fridge (600mm)$900–$2,200Most practical refrigeration spec
Underbench freezer (600mm)$1,000–$2,500Where frozen storage required
Stainless bench run (1,200mm)$500–$1,200Standard depth 700mm
Bain marie (countertop)$400–$1,000For hot hold service
Full truck kitchen package$8,000–$18,000Equipment only, excl. build costs

← Swipe to view →

Reconditioned equipment is a practical option for food truck operators — the lower-intensity duty cycle of event and market service means a reconditioned underbench fridge or bench run performs well for years. Browse MRCE's used commercial kitchen equipment listings for currently available compact units.

For operators running multiple food trucks or planning to expand an existing mobile food operation, MRCE can supply equipment across the full vehicle fleet from a single trade account. Consistent specifications across vehicles — the same underbench fridge model, the same benching standard, the same burner configuration — simplifies servicing, parts ordering, and staff training. It is a practical advantage that becomes more valuable as the operation scales. Talk to the trade team at the Dandenong showroom about fleet equipment supply for Melbourne food truck operators.

MRCE in Numbers

40+Years on Station Street, Dandenong
10+Major brands stocked
24/7After-sales support
100%Australia-wide shipping
FreeSite consultations
MRCE FAST FINANCE

Flexible, tailored kitchen equipment funding

Why rent when you can own? MRCE offers a flexible funding solution for commercial kitchen equipment, tailored to suit the hospitality industry.

  • No hidden costs
  • No balloon payment at the end
  • Claim the GST upfront at the start
  • Own the equipment from day one
  • Fast and streamlined approval
  • Funding options to suit your application
Explore finance options

From Inception to Completion — End-to-End Project Management

From inception to design, throughout installation to completion — let our expert staff oversee your project. No matter how large or small, we work closely with architects and consultants on your commercial kitchen and bar requirements. We arrange qualified service technicians for equipment problems whenever they crop up — a kitchen down is a kitchen losing money. At MRCE we aim to keep our customers coming back time and again as their business grows.

For Melbourne food truck operators, MRCE's support extends to advising on the compact commercial equipment that fits specific truck dimensions — a conversation that starts with your floor plan and weight budget, not a standard equipment catalogue. See the full south-east Melbourne sourcing context in our guide to where to buy commercial kitchen equipment in south-east Melbourne. You can also browse the full MRCE product range online before visiting the showroom.

Why Melbourne Food Truck Operators Choose MRCE for Commercial Kitchen Equipment

MRCE has been supplying compact commercial kitchen equipment to Melbourne's hospitality sector since 1984. The Dandenong showroom stocks underbench refrigeration, compact cooking equipment, countertop units, and stainless benching — the four categories that form the core of every food truck kitchen build. New and reconditioned equipment is available side-by-side. Finance is in-house.

South-east Melbourne's food truck and market circuit runs through Dandenong, Springvale, Pakenham, Berwick, and Cranbourne — all within easy reach of the Station Street showroom. Operators building or upgrading trucks in this corridor have been calling MRCE since long before food trucks became a mainstream hospitality format. Call (03) 9794 8627 or visit 15 Station Street, Dandenong. Also read our broader commercial kitchen equipment guide for Dandenong operators.

Questions, concerns, or need a hand?

Whether you are building your first food truck or upgrading an existing one, MRCE's team can match compact commercial equipment to your truck's dimensions, payload, and menu requirements.

Get in touch with our team

Visit, call, or email us

Showroom

15 Station Street
Dandenong, Victoria 3175

Australia-wide shipping available

Get in touch

Phone: (03) 9794 8627
Fax: (03) 9794 7258
Email: sales@melbournerefrigeration.com.au

Trading hours

Monday – Friday
Sales / Service: 9:00am – 5:00pm
Admin: 8:30am – 3:30pm
Saturday: By appointment only
Please call during the week to arrange. Closed on public holidays.

What we cover

Sales, finance, free consultation, installation, fitout management, after-sales service and 24/7 technical support.

Frequently Asked Questions

What commercial kitchen equipment does a Melbourne food truck need?

A Melbourne food truck kitchen needs equipment across five zones: cooking (LPG burner range, griddle, countertop fryer), refrigeration (underbench fridge and freezer), prep and service (stainless bench run, bain marie), water system (fresh and grey water tanks, hand-wash basin), and power and safety (LPG regulator, generator or battery system, fire suppression). All equipment must comply with FSANZ Standard 3.2.2 food safety requirements regardless of the mobile kitchen format.

What size commercial fridge fits in a Melbourne food truck?

Underbench refrigeration in 600mm or 900mm widths is the practical specification for most Melbourne food trucks. Standard 600mm underbench fridges fit beneath a typical truck bench run without exceeding canopy height or payload limits. Upright commercial fridges are generally impractical in food truck applications due to height, weight, and space constraints. MRCE stocks underbench fridges suited to food truck builds at the Dandenong showroom.

Does a Melbourne food truck need a hand-wash basin?

Yes — FSANZ Standard 3.2.2 requires a dedicated hand-wash basin separate from food preparation sinks, and this requirement applies to food trucks as fully as to fixed premises. Melbourne Council health inspectors check for this at every permit inspection. The basin must have running water from a fresh water system with adequate capacity for the service day, typically a minimum 40L tank.

Can I finance commercial kitchen equipment for a Melbourne food truck?

Yes. MRCE Fast Finance is available on food truck equipment packages. Finance features include no balloon payment, no hidden costs, and GST claimable upfront. A full food truck kitchen equipment package of $8,000–$18,000 can be financed as a single facility. Visit our finance page for details.

How much does it cost to equip a Melbourne food truck kitchen?

A complete food truck kitchen equipment package — LPG cooking equipment, underbench refrigeration, stainless benching, and service equipment — typically costs $8,000–$18,000 new. Reconditioned equipment reduces this significantly. Individual items range from $400 for a countertop bain marie to $2,200 for a quality underbench fridge. Finance is available to spread the cost. Contact MRCE for a current quote based on your truck dimensions and menu requirements.

0 Comments

Submit a Comment

Your email address will not be published. Required fields are marked *

Product Enquiry

0
    0
    Your Cart
    Your cart is emptyReturn to Shop