Every busy kitchen depends on water, storage and workflow, and the humble commercial kitchen sink sits at the centre of all three. Get the sink, the hand basin and the shelving right and service runs smoothly. Get them wrong and staff queue for a basin, stock ends up on the floor and the health inspector has questions.
This layout guide comes from the team at Melbourne Refrigeration & Catering Equipment in Dandenong, who have supplied Victorian hospitality businesses since 1984. We cover single and double bowl sinks, hand basin requirements, and shelving for cool rooms and dry stores, along with load ratings, so you can plan a kitchen that works on opening day and keeps working.
Key takeaways
- A double bowl sink separates washing from rinsing, while a single bowl saves space and suits big pots.
- A hand basin is for hands only and must be easy to reach, so plan it before the sinks.
- Stainless steel is the standard for sinks and shelving because it resists corrosion and wipes clean.
- Always ask for the rated load per shelf in writing and keep heavy items on the lower levels.
- Keep stock off the floor and away from walls so your team can clean and rotate it easily.
- Talk to our Dandenong team for a free consultation and straight advice on your layout.
Choosing a Commercial Kitchen Sink: Single vs Double Bowl
The first decision is the number of bowls. A single bowl sink gives you one large, deep basin that suits washing big pots, trays and bulky items, and it takes up less bench length. It works well in a small cafe, a food truck or a prep area where only one task happens at a time. The drawback is that you cannot wash and rinse at the same time, and you cannot keep a clean zone separate from a dirty one.
A double bowl sink splits the job. One bowl is for washing in hot detergent water, and the other is for rinsing or sanitising. That separation is easier to manage, faster during a rush and kinder to your hands and your cookware. Many restaurants, takeaways and caterers choose a double bowl as their main wash sink for exactly that reason. A triple bowl adds a third stage, which can suit larger kitchens that wash by hand at volume.
Think about what each sink is for before you choose. A dedicated pot wash sink needs depth and a strong frame, because heavy stock pots and trays will be dropped into it all day. A prep sink for vegetables and produce needs to be separate from where raw meat is handled, and it should never double as a hand basin. Many kitchens end up with two or three sinks, each with a clear job, rather than one sink that tries to do everything.
Drainer boards and splashbacks matter as well. A sink with an integrated drainer lets clean items rest and dry without cluttering the bench, while a tall splashback protects the wall from water and keeps the join easy to clean. Our guide to setting up a commercial kitchen in Melbourne shows where the sink fits in the wider layout, from receiving to service.
| Feature | Single bowl | Double bowl |
|---|---|---|
| Bench space needed | Less | More |
| Washing and rinsing at once | No | Yes |
| Large pots and trays | Easy to fit | Depends on bowl size |
| Separate clean and dirty zones | Difficult | Easier |
| Best suited to | Small cafes, food trucks, prep areas | Restaurants, takeaways, caterers |
Hand Basin Requirements and Where to Put Them
A hand basin is not a sink, and it should never be treated as one. In a food business, the hand basin is a dedicated station used only for washing hands. Staff should not rinse pots, tip out mop water or fill buckets there. Keeping it for hands only is a basic food safety rule.
Under the Food Standards Code, food businesses are expected to provide handwashing facilities that are permanent, easy to reach and supplied with warm running water, soap and a hygienic way to dry hands. The Food Standards Australia New Zealand website explains the national food safety standards, and your council environmental health officer can confirm exactly what your premises need.
Position matters as much as the fitting. Put a basin where staff naturally pass on the way into the cooking and prep areas, close to where raw food is handled and near the toilets. A basin tucked behind a door or blocked by stock will not get used. In a larger kitchen, plan at least one near each main work zone, so no one has to cross the room with dirty hands.
Check the requirements early, before you buy equipment. Local councils register food premises and assess fitouts, and the City of Greater Dandenong is the authority for our own area. Show your plans to the environmental health team before the builder starts, because it is far cheaper to move a basin on paper than in a finished kitchen.
Stainless Steel Sink Commercial Options: Build and Materials
Search for a stainless steel sink commercial kitchens can rely on and you will find a wide range of builds. Stainless steel is the standard material because it resists corrosion, handles heat, wipes clean and does not hold odours the way porous surfaces can. But not all stainless steel is equal, and build quality is where the price difference shows.
Look at the thickness of the steel, the welds and the bracing underneath. Thicker sheet resists denting and drumming, which is the loud noise a thin sink makes when a pot hits it. Welded and polished joins are easier to clean than pressed corners that trap grime. Coved corners inside the bowl, where the walls curve into the base rather than meeting at a sharp angle, help keep it hygienic. Adjustable feet or a sturdy frame keep the sink level on an uneven floor.
Taps are part of the package. Hospitality kitchens commonly use a swing spout or a pre-rinse spray hose, because they make filling pots and rinsing trays much faster. Lever style handles keep dirty hands away from the tap. Tap and waste fittings are plumbing items, so plan the hot and cold water supply, the waste size and any trade waste requirements with a licensed plumber and your water authority.
You can see what we supply in our commercial kitchen supplies in Melbourne guide, then ask our team what is available today. We do not name specific brands or sizes in this article because stock changes, so call or visit the showroom for current options.
Planning the Wash Zone Workflow
A good wash zone moves dirty items in one direction and clean items out the other. Dirty trays and pots arrive from the cooking line, get scraped, washed, rinsed and sanitised, then dry on a rack or drainer before going back to their shelf. If clean and dirty items cross paths, you risk spreading contamination and you waste time.
Place the wash sink close to the cooking line and the pass, but not so close that splashes reach the food. Leave a clear bench on the dirty side for stacking and scraping, and a clear bench on the clean side for drying. A pre-rinse spray and a waste chute or bin within reach cut the mess considerably. If you use a machine as well as a sink, keep the machine in the same flow rather than on the far side of the room.
Think about the staff as well. A sink bench that is too low or too high causes back strain over long shifts, and a floor that stays wet is a slip risk. WorkSafe Victoria publishes guidance on manual handling and safe workplaces, and it is worth reading when you set bench heights and walkways. Anti-slip matting and good drainage near the sink are cheap fixes that prevent expensive injuries.
Finally, leave room for growth. A sink that is just big enough on day one can become a bottleneck when the menu expands or you add a lunch trade. Browse our commercial kitchen gear in Melbourne to see how the pieces of a kitchen fit together, and plan a little more wash capacity than you think you need.
Stainless Steel Shelving for Cool Rooms and Dry Stores
Stainless steel shelving is the preferred choice for cool rooms, because the environment is cold and damp and the shelves must be washed down regularly. Stainless steel does not rust or flake the way a painted or coated surface can, and it holds up to the cleaning chemicals a food business uses. It costs more than lighter options, but it lasts, and in a cool room the longer life usually wins.
Open wire or slatted shelves help in refrigerated spaces because air can move through them. Cold air needs to circulate around the stock, and solid shelves covered with boxes can block it and create warm spots. Leave a gap between stock and the cool room walls, and never stack product so high that it touches the evaporator or the ceiling. If you are planning a new cool room, our commercial refrigeration range is the place to start, because the room and the shelving inside it should be designed together.
Dry stores have different needs. Here the shelves carry flour, rice, oil, tins and packaging, which are heavy and need to stay dry and pest free. Solid or closed shelves can suit some items, while ventilated shelves suit others. The main rule is to keep everything off the floor, so the floor can be cleaned and so spills and pests are easier to spot. Many food premises follow a minimum clearance under the lowest shelf, and your council can tell you what it expects.
Storage in the cool room should follow food safety logic. Keep raw meat and fish on the lowest shelves, below cooked and ready to eat food, so nothing can drip onto it. Store allergens and strongly flavoured items sensibly, and label everything with the date it was received or prepared. The national food safety standards set out the principles, and clear shelf zones make them easy for staff to follow.
Free, obligation-free consultation
For your next project, visit our showroom or ask for someone to attend your premises, obligation-free. There’s no charge, no pressure, no follow-up sales call. Just our team walking your floor and giving straight answers about what fits.Book your free consultationLoad Ratings and Safe Loading
A shelf looks solid until it is loaded with a full carton of tinned tomatoes, a bag of flour and a tub of oil. Load rating tells you how much weight a shelf and its frame can safely carry, and it is the single most important number on a shelving specification. Do not guess. Ask for the rated load per shelf and for the whole unit, and ask for it in writing.
Pay attention to how the rating is measured. Most ratings assume the weight is spread evenly across the shelf rather than sitting in one spot. A heavy item concentrated in the middle of a span can bend a shelf that would carry the same weight spread out. The number of shelves, the spacing of the uprights and the way the frame is braced all affect the real capacity, so compare complete units rather than shelf sizes alone.
Load the unit sensibly once it is in place. Put the heaviest items on the lower levels, where they are safer to lift and keep the unit stable. Light items such as packaging and napkins can go higher. Never use shelving as a ladder, and use a proper step for high levels. If the unit stands on an uneven floor, level it with the adjustable feet before loading it, because a leaning frame carries less than a level one.
Manual handling is part of the picture. Heavy stock on a high shelf is a back injury waiting to happen, so store the bulky and heavy items between knee and shoulder height. If your menu relies on bulk ingredients, plan wheeled trolleys or a lower shelf layout from the start, rather than asking staff to lift sacks overhead.
Commercial Shelving Layout and Commercial Kitchen Storage Rules
Good commercial shelving is a system, not a collection of units. Start by listing what you store, how much of it and how often you reorder. A cafe that receives fresh deliveries daily needs far less dry storage than a restaurant that orders weekly in bulk. Size the space for your busiest week, not your quietest.
Group stock by type and by how often it is used. Fast moving items should sit within easy reach of the cooking line, and slow moving bulk stock can go further back. Use the first in, first out method, placing new deliveries behind or beneath older stock so the oldest product is used first. Clear labels, in large print, let a new team member find what they need without asking.
Keep commercial kitchen storage clean and organised. Cleaning chemicals belong in a separate area, away from food and packaging. Leave a gap between shelving and the wall so you can sweep behind it and spot pests early. Wipe shelves on a regular schedule, and take everything off to deep clean at set intervals. A tidy store makes stocktakes quicker and reduces waste from forgotten stock.
Finally, plan the space around the shelving. Aisles need to be wide enough for a trolley and two people to pass. Doors should swing clear of the shelves. Lighting should reach the lowest shelf. See our range of catering equipment for sale in Melbourne for the trolleys, racks and benches that work alongside your shelving.
New or Second Hand Sinks and Shelving?
Stainless steel holds its value, so second hand sinks and shelving can be a sensible way to cut start-up costs. Inspect carefully. Check for dents, cracks, loose welds, wobbly legs and rust around the joins, and test the load with the unit empty before you trust it. A used sink with a damaged bowl or leaking waste will cost more to fix than it saved. Our guide to second hand commercial kitchen equipment in Melbourne explains what to ask before you buy.
New equipment gives you a full warranty, current specifications and a known load rating, which suits a venue that cannot afford downtime or a council re-inspection. Browse our new equipment range and read our advice on how to buy commercial catering equipment before you decide. We cannot confirm specific models in this article, so ask our team what is available today.
MRCE FAST FINANCE
Flexible, tailored kitchen equipment funding
Why rent when you can own? MRCE offers a flexible funding solution for commercial kitchen equipment, tailored to suit the hospitality industry.- No hidden costs
- No balloon payment at the end
- Claim the GST upfront at the start
- Own the equipment from day one
- Fast and streamlined approval
- Funding options to suit your application
Budget and Finance for Your Layout
Set your budget around the whole wash and storage area, not just the sink. Add plumbing and electrical work, taps and waste fittings, delivery, installation, and the shelving to go with it. A cheap sink that needs reworking after a council inspection costs more than a good one done once.
Finance can ease the start. Our funding option lets you claim the GST upfront and own the equipment from day one, with no balloon payment at the end. It keeps cash free for stock, wages and marketing while you settle into the new kitchen. Our showroom at 15 Station Street, Dandenong lets you see equipment first-hand, and we ship Australia wide.
Forty Years of Hospitality Expertise, Since 1984
Since 1984 we have supplied the hospitality industry with professional advice, reliable equipment and excellent customer service. We have a wealth of experience in all types of projects ranging from international hotels to large and small pubs through to suburban restaurants and takeaway outlets. All our staff are equipped with the knowledge, expertise and creativity to add value to your project.
Helping kitchens plan their wash zone, hand basins and storage so the whole room works together is part of that work. Read more about who we are on our about page.
Melbourne Refrigeration & Catering Equipment, supplying Australia’s hospitality industry since 1984
Questions, concerns, or need a hand?
Don’t hesitate to reach out. MRCE’s dedicated team is ready to provide the support you need: a quick technical question, a quote on a specific unit, a finance enquiry, or a full kitchen fitout. We’ll point you to the right answer, even if that’s not buying from us today.Get in touch with our teamWhen you would like help planning your sinks, hand basins and shelving, get in touch with our team. It is free, there is no obligation, and there is no pressure.
Visit, call, or email us
Dandenong, Victoria 3175Australia-wide shipping available
Sales / Service: 9:00am to 5:00pm
Admin: 8:30am to 3:30pm
Saturday: By appointment onlyPlease call during the week to arrange. Closed on public holidays.


0 Comments